Uslan 8014 Taper - KyleDruey

--part1_151.202f27e4.2c168c25_boundary
Content-Type: text/plain; charset="US-ASCII"
Content-Transfer-Encoding: 7bit

Hi List,

I just picked up an Uslan 8014 in a trade and I thought some of you (Bill 
"Trirod" Fink) might be interested in the taper.  The rod is 8' 2/2 and throws a 
nice 4wt with a medium-fast type action (closer to medium than medium-fast):

2" - 0.079
5" - 0.100
10" - 0.128
15" - 0.148
20" - 0.162
25" - 0.172
30" - 0.186
35" - 0.202
40" - 0.228
45" - 0.234
50" - 0.218
55" - 0.233
60" - 0.260
65" - 0.265
70" - 0.281
75" - 0.290
80" - 0.298
85" - 0.300
86' - 0.301

Measurements are apex to flat, and the rod is impregnated so no deduction for 
finish is needed.  The measurements at the 50" & 55" stations are correct as 
I measured all around that area and it seems that Nat Uslan decided to make 
the rod that way.

Kyle

--part1_151.202f27e4.2c168c25_boundary
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

Hi List,



I just picked up an Uslan 8014 in a trade and I thought some of you (Bill "T=
rirod" Fink) might be interested in the taper.  The rod is 8' 2/2 and t=
hrows a nice 4wt with a medium-fast type action (closer to medium than mediu=
m-fast):



2" - 0.079

5" - 0.100

10" - 0.128

15" - 0.148

20" - 0.162

25" - 0.172

30" - 0.186

35" - 0.202

40" - 0.228

45" - 0.234

50" - 0.218

55" - 0.233

60" - 0.260

65" - 0.265

70" - 0.281

75" - 0.290

80" - 0.298

85" - 0.300

86' - 0.301



Measurements are apex to flat, and the rod is impregnated so no deduction fo=
r finish is needed.  The measurements at the 50" & 55" stations are=
 correct as I measured all around that area and it seems that Nat Uslan deci=
ded to make the rod that way.



Kyle

--part1_151.202f27e4.2c168c25_boundary--