| Rod Name | Grantham Ron 120/63 ETSpey |
| Length (inches) | 120 |
| Length (feet) | 10 |
| Line Weight | 6 |
| Number of pieces | 3 |
| Number of tips | 1 |
| Construction | Spey |
| Comments | 120-.465 125-480 130-.495 135-.510 140-.525 144-.537 ET is Electrical Tape This rod has three sections and was made specifically for floating lines and skating deer hair flies for west coast steelhead. The rod is a bit too soft for heavy sinking lines and large flies. It was also designed to be hollow-built with spliced ferrules. I use a Rio Mid-Spey 6/7 line and can routinely Spey-cast 80-90 feet with it. The joints have a 25:1 slope tapering to .060". The spliced ferrule overlaps are: butt to mid: 7.86"; mid to tip: 4.57". The finished rod should be exactly 12 feet long. The joints are held together with transparent tape |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Ferrule 2 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.111 | 0.056 |
| 5 | 0.122 | 0.061 |
| 10 | 0.138 | 0.069 |
| 15 | 0.162 | 0.081 |
| 20 | 0.182 | 0.091 |
| 25 | 0.198 | 0.099 |
| 30 | 0.213 | 0.107 |
| 35 | 0.228 | 0.114 |
| 40 | 0.241 | 0.121 |
| 45 | 0.255 | 0.128 |
| 50 | 0.268 | 0.134 |
| 55 | 0.281 | 0.141 |
| 60 | 0.295 | 0.148 |
| 65 | 0.309 | 0.155 |
| 70 | 0.322 | 0.161 |
| 75 | 0.336 | 0.168 |
| 80 | 0.350 | 0.175 |
| 85 | 0.363 | 0.182 |
| 90 | 0.378 | 0.189 |
| 95 | 0.391 | 0.196 |
| 100 | 0.406 | 0.203 |
| 105 | 0.420 | 0.210 |
| 110 | 0.435 | 0.218 |
| 115 | 0.450 | 0.225 |
| Guide | Location | Size |
|---|