| Rod Name | Leonard 38 7042 |
| Length (inches) | 84 |
| Length (feet) | 7 |
| Line Weight | 4 |
| Number of pieces | 2 |
| Number of tips | 0 |
| Construction | Hex |
| Comments | Since people were requesting it figured I might as well post this to list this is the taper I used to build my dad's rod (I think I got it from an old Planing Form??) I got several others that I think were actually confused with 38L and 38H models. Leonard 38 ACM c. 1960 7'0" 2 pc 4 wt (measured over bare bamboo) |
| Deduction for varnish | 0 |
| Allowance for form setting | 0 |
| Ferrule 1 | 0/64 | Location | 0 |
| Station | Dimension | Form Setting |
|---|---|---|
| 0 | 0.064 | 0.032 |
| 5 | 0.080 | 0.040 |
| 10 | 0.092 | 0.046 |
| 15 | 0.106 | 0.053 |
| 20 | 0.118 | 0.059 |
| 25 | 0.130 | 0.065 |
| 30 | 0.140 | 0.070 |
| 35 | 0.148 | 0.074 |
| 40 | 0.156 | 0.078 |
| 45 | 0.182 | 0.091 |
| 50 | 0.198 | 0.099 |
| 55 | 0.212 | 0.106 |
| 60 | 0.223 | 0.112 |
| 65 | 0.236 | 0.118 |
| 70 | 0.250 | 0.125 |
| 75 | 0.272 | 0.136 |
| 80 | 0.290 | 0.145 |
| 85 | 0.290 | 0.145 |
| Guide | Location | Size |
|---|